[. . . ] Do not share the same power outlet with other equipment to prevent overheat and fire. If the supply cord is damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to prevent electric shock or fire. In case of emergency or abnormal conditions (burnt smell, etc), turn off the power supply, and please consult authorized dealer. [. . . ] ⷠThe power indicator blinks to indicate the indoor unit is standing by for different operation mode. Press and pull out Insert AAA or R03 batteries (can be used ~ 1 year) Press CLOCK To turn ON or OFF the unit at a preset time. Unit selects operation mode according to temperature setting, outdoor and room temperature. hEAT mode - To enjoy warm air · Unit takes a while to warm up. FAN mode - To enables air circulation in the room COOL mode - To enjoy cool air DRY mode - To dehumidify the environment · Unit operates at low fan speed to give a gentle cooling operation. ⷠDuring soft dry operation, the indoor fan operates at a low fan speed. ⷠThe louvers movement might not align with the remote control display. When ON timer is set, the unit may start early before the actual set time in order to achieve the desired temperature on time. If the main power is switched off for an hour or more, the clock and timer will need to be set again. To avoid unintentional operation, you can assign a different address to each indoor unit. ⷠPress repeatedly to select your desired address setting. For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. ⷠIf the operation mode is set to Fan, the fan speed will be fixed at MEDIUM regardless of the temperature setting. ⷠIf the address is set to GROUP, more than one indoor unit can be operated at the same time. Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. The airflow direction can be adjusted as desired by using remote control. Unit selects operation mode according to temperature setting, outdoor and room temperature. hEAT mode - To enjoy warm air · Unit takes a while to warm up. FAN mode - To enables air circulation in the room COOL mode - To enjoy cool air DRY mode - To dehumidify the environment · Unit operates at low fan speed to give a gentle cooling operation. ⷠDuring soft dry operation, the indoor fan operates at a low fan speed. ⷠThe louvers movement might not align with the remote control display. When ON timer is set, the unit may start early before the actual set time in order to achieve the desired temperature on time. [. . . ] ⷠThe unit is in defrosting mode, and the melted frost is drained from the outdoor unit. The unit is running cooling operation with low fan speed to dehumidify the room. Fan speed change occasionally during heating · Room temperature drops again, the fan speed will resume to the remote control settings. ⷠThis is due to defrost operation happens at the heat exchanger. [. . . ]